How do I measure for a Custom Chiminea Cover?

This guide explains how to measure your chiminea for a custom-fitted Kuvr® Chiminea Cover, including each required measurement, where to take it, and how to record it accurately. There are 7 measurements to take, labelled A to G.

Kuvr measuring guide diagram for a chiminea cover, showing measurement points A to G

Important

Provide exact measurements with no extra allowance added. Kuvr® adds a standard tolerance of +25 mm (1 in) to the width and depth for a comfortable fit; no allowance is added to the height. You can measure in centimetres, inches, or metres — you choose your preferred unit when you configure the cover.

Please include photos

Photos of your chiminea, taken from a few angles alongside your measurements, help us understand the exact shape and get your cover right from the outset. Including a tape measure in shot for scale is ideal.

The measurements

A — Total width

This is the total width of the chiminea at its widest, including the legs. Measure straight across from side to side.

B — Total depth

This is the total depth from front to back, at its widest. Measure across from front to back.

C — Total height

This is the vertical height from the floor to the top of the chimney. Measure vertically from the floor, keeping the tape straight and plumb.

D — Height to chimney

This is the vertical height from the floor to the base of the chimney, where the neck meets the bowl. Measure vertically from the floor.

E — Height of chimney

This is the height of the chimney (neck) alone, from the top of the bowl up to the top of the chimney. Measure vertically.

F — Width (diameter) of chimney

This is the width (diameter) across the top opening of the chimney. Measure straight across the mouth.

G — Circumference

This is the distance all the way around the widest part of the bowl. Wrap the tape around the body at its widest point.

Frequently asked questions

Do I measure the chiminea on its stand?

Yes. Measure the chiminea as it stands, on its stand or legs, exactly as it will sit when covered.

Should I measure the chiminea or my old cover?

Measure the chiminea itself, with any existing cover removed. Measuring over an old cover adds thickness and gives an oversized result.

Do I need to let it cool before covering?

Yes. Always let the chiminea cool completely before putting the cover on. Measure and cover it when it is cold — this also gives the most accurate fit.

Can I measure in inches?

Yes. Measure in centimetres, inches, or metres — you choose your preferred unit when you configure the cover. Keep the same unit throughout.

Ready to order?

Configure your own cover and get an instant quote on our Custom Chiminea Cover product page.

Downloads

Download the PDF measuring guide
Download the JPG measuring guide

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us