How do I measure for a Custom Square Fire Column Cover (Raised Insert)?

This guide explains how to measure your square fire column with a raised insert for a custom-fitted Kuvr® Fire Pit Cover, including each required measurement, where to take it, and how to record it accurately. There are 6 measurements to take, labelled A to F.

Kuvr measuring guide diagram for a square fire column with a raised insert cover, showing measurement points A to F

Important

Provide exact measurements with no extra allowance added. Kuvr® adds a standard tolerance of +25 mm (1 in) to the width and depth for a comfortable fit; no allowance is added to the height. You can measure in centimetres, inches, or metres — you choose your preferred unit when you configure the cover.

Please include photos

Photos of your square fire column with a raised insert, taken from a few angles alongside your measurements, help us understand the exact shape and get your cover right from the outset. Including a tape measure in shot for scale is ideal.

The measurements

A — Total width

This is the total width of the main column. Measure straight across the front from side to side, at the widest part.

B — Total depth

This is the total depth of the main column. Measure from front to back, at the widest part.

C — Total height

This is the vertical height from the floor to the highest point. Measure vertically from the floor, keeping the tape straight and plumb.

D — Width of upper column

This is the width of the raised upper column. Measure straight across the front from side to side, at its widest.

E — Depth of upper column

This is the depth of the raised upper column. Measure from front to back, at its widest.

F — Height from base to top of main column

This is the vertical height from the floor to the top of the main column, where the upper column begins. Measure vertically from the floor, keeping the tape straight and plumb.

Frequently asked questions

What if my fire column is not a standard shape?

Measure the closest standard shape shown here and send photos of your fire column. We confirm the exact pattern from your measurements and images before cutting, so an unusual shape is not a problem.

Should I measure the fire column or my old cover?

Measure the fire column itself, with any existing cover removed. Measuring over an old cover adds thickness and gives an oversized result.

Does the cover fit gas and wood-burning fire columns?

Yes. The cover is made to the outer dimensions you provide, so it fits any fire column of that shape and size regardless of fuel type.

Ready to order?

Configure your own cover and get an instant quote on our Custom Fire Pit Cover product page.

Downloads

Download the PDF measuring guide
Download the JPG measuring guide

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us