How do I measure for a Custom Picnic Table Cover (Hexagon)?

This guide explains how to measure your hexagonal picnic table for a custom-fitted Kuvr® Picnic Table Cover, including each required measurement, where to take it, and how to record it accurately. There are 6 measurements to take, labelled A to F.

Kuvr measuring guide diagram for a hexagonal picnic table cover, showing measurement points A to F

Important

Provide exact measurements with no extra allowance added. Kuvr® adds a standard tolerance of +25 mm (1 in) to the width and depth for a comfortable fit; no allowance is added to the height. You can measure in centimetres, inches, or metres — you choose your preferred unit when you configure the cover.

Please include photos

Photos of your hexagonal picnic table, taken from a few angles alongside your measurements, help us understand the exact shape and get your cover right from the outset. Including a tape measure in shot for scale is ideal.

The measurements

A — Total width (across benches, point to point)

The overall width across the benches, measured point to point (corner to corner) at the widest.

B — Total height

The vertical height from the floor to the top of the table.

C — Height to top of seat

The vertical height from the floor to the top of the bench seat.

D — Width of table top (point to point)

The width across the hexagonal table top, measured point to point (corner to corner).

E — Width of one side

The width of one side (one facet) of the hexagonal table top.

F — Width between legs at base

The width between the legs at the base, at the widest.

Frequently asked questions

Which picnic table guide should I use?

Pick the guide that matches your table: a rectangle with attached benches or with separate (detached) benches, a hexagon, or a round table. Choose the closest shape.

Does the cover go over the benches too?

Yes. The cover is shaped over the whole table-and-bench set as one piece, so measure to the outer edges of the benches where the guide asks.

Should I remove the parasol and anything on the table first?

Yes. Measure the bare table and benches — take out any parasol and clear cushions or tableware so the cover fits the furniture itself.

Can I measure in inches?

Yes. Measure in centimetres, inches, or metres — you choose your preferred unit when you configure the cover. Keep the same unit throughout.

Ready to order?

Configure your own cover and get an instant quote on our Custom Picnic Table Cover product page.

Downloads

Download the PDF measuring guide
Download the JPG measuring guide

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us