How do I measure for a Custom Swing Seat Cover (Roll Back)?

This guide explains how to measure your roll-back porch swing seat for a custom-fitted Kuvr® Swing Seat Cover, including each required measurement, where to take it, and how to record it accurately. There are 8 measurements to take, labelled A to H.

Kuvr measuring guide diagram for a roll-back porch swing seat cover, showing measurement points A to H

Important

Provide exact measurements with no extra allowance added. Kuvr® adds a standard tolerance of +25 mm (1 in) to the width and depth for a comfortable fit; no allowance is added to the height. You can measure in centimetres, inches, or metres — you choose your preferred unit when you configure the cover.

Please include photos

Photos of your roll-back porch swing seat, taken from a few angles alongside your measurements, help us understand the exact shape and get your cover right from the outset. Including a tape measure in shot for scale is ideal.

The measurements

A — Total width

The overall width of the swing seat at its widest, measured straight across.

B — Total depth

The overall front-to-back depth of the seat at its deepest.

C — Total height

The vertical height from the base of the seat to the top of the rolled backrest.

D — Height to top of arm

The vertical height from the base of the seat to the top of the armrest.

E — Distance between chain fixings, front to back

The front-to-back distance between the chain fixing points on the seat.

F — Distance between chains, side to side

The width between the two hanging chains, measured side to side.

G — Width of backrest

The width across the backrest at its widest.

H — Depth of arm

The front-to-back depth of the armrest.

Frequently asked questions

Which swing seat guide should I use?

Pick the guide that matches your swing — a canopy swing on an A-frame with a roof, or a chain-hung bench seat with a flat back or a roll back. Choose the closest shape.

My swing hangs on chains — do I include them?

Measure the seat itself, plus the chain positions where the guide asks for them (for example the distance between the chains). The cover is shaped to the seat — you don’t need to cover the chains.

Do I measure with the cushions in place?

Yes. Measure the swing exactly as it will sit when covered, with any seat or back cushions in their normal positions.

Can I measure in inches?

Yes. Measure in centimetres, inches, or metres — you choose your preferred unit when you configure the cover. Keep the same unit throughout.

Ready to order?

Configure your own cover and get an instant quote on our Custom Swing Seat Cover product page.

Downloads

Download the PDF measuring guide
Download the JPG measuring guide

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us