How do I measure for a Custom Sofa Cover (U-Shape Sectional, Left Chaise)?

This guide explains how to measure your U-shape single-chaise sectional sofa with a left chaise for a custom-fitted Kuvr® Outdoor Sofa Cover, including each required measurement, where to take it, and how to record it accurately. There are 12 measurements to take, labelled A to L.

Kuvr measuring guide diagram for a U-shape single-chaise sectional sofa with a left chaise cover, showing measurement points A to L

Important

Provide exact measurements with no extra allowance added. Kuvr® adds a standard tolerance of +25 mm (1 in) to the width and depth for a comfortable fit; no allowance is added to the height. You can measure in centimetres, inches, or metres — you choose your preferred unit when you configure the cover.

Please include photos

Photos of your U-shape single-chaise sectional sofa with a left chaise, taken from a few angles alongside your measurements, help us understand the exact shape and get your cover right from the outset. Including a tape measure in shot for scale is ideal.

The measurements

A — Total width

The overall width across the whole sofa at its widest, measured straight from one outer end to the other.

B — Total depth

The overall front-to-back depth at its deepest, across the chaise.

C — Total height

The vertical height from the floor to the top of the backrest.

D — Depth of right section

The front-to-back depth of the right-hand (non-chaise) section, as shown by arrow D.

E — Inside length, right section

The inside length of the right-hand section, measured along its inner edge, as shown by arrow E.

F — Inside length, long section

The inside length of the long back run of seats, measured along its inner edge, as shown by arrow F.

G — Depth of chaise, inner side

The front-to-back depth of the chaise measured along its inner edge, as shown by arrow G.

H — Width of chaise

The width of the chaise, as shown by arrow H.

I — Height of chaise

The vertical height from the floor to the top of the chaise seat.

J — Depth of chaise, outer side

The front-to-back depth of the chaise measured along its outer edge, as shown by arrow J.

K — Height to top of arm

The vertical height from the floor to the top of the armrest.

L — Depth from cushion to rear

The front-to-back depth from the front of the seat cushion to the rear of the sofa, as shown by arrow L.

Frequently asked questions

Do I measure each module or the whole sofa?

Measure the whole U as one assembled piece, using the individual section dimensions labelled in the diagram (chaise, long run and the opposite section). Don’t just measure one module and multiply — give each labelled measurement so we capture the true overall shape.

My sofa isn’t perfectly symmetrical — does that matter?

No. The guide asks for each side separately for exactly this reason. Measure each side as it actually is and send a couple of photos alongside your figures.

Do I measure with the cushions in place?

Yes. Measure the sofa exactly as it will sit when covered, with the seat and back cushions in their normal positions.

Can I measure in inches?

Yes. Measure in centimetres, inches, or metres — you choose your preferred unit when you configure the cover. Keep the same unit throughout.

Ready to order?

Configure your own cover and get an instant quote on our Custom Outdoor Sofa Cover product page.

Downloads

Download the PDF measuring guide
Download the JPG measuring guide

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us