How do I measure for a Custom Outdoor Egg Chair Cover (Double, Hanging)?

This guide explains how to measure your double hanging outdoor egg chair for a custom-fitted Kuvr® Egg Chair Cover, including each required measurement, where to take it, and how to record it accurately. There are 5 measurements to take, labelled A to E.

Kuvr measuring guide diagram for a double hanging outdoor egg chair cover, showing measurement points A to E

Important

Provide exact measurements with no extra allowance added. Kuvr® adds a standard tolerance of +25 mm (1 in) to the width and depth for a comfortable fit; no allowance is added to the height. You can measure in centimetres, inches, or metres — you choose your preferred unit when you configure the cover.

Please include photos

Photos of your double hanging outdoor egg chair, taken from a few angles alongside your measurements, help us understand the exact shape and get your cover right from the outset. Including a tape measure in shot for scale is ideal.

The measurements

A — Total width

The overall width of the pod at its widest, measured straight across the front.

B — Total depth

The overall front-to-back depth of the pod, as shown by arrow B.

C — Total height

The vertical height of the pod from its lowest point to its top (excluding the stand or frame).

D — Front opening width

The width across the front opening of the pod, where you get in and out.

E — Width between chain

The width of the gap between the two hanging chains at the top.

Frequently asked questions

Which outdoor chair guide should I use?

Pick the guide that matches your chair — bar chair, office chair, recliner, rocking chair, sofa chair, stool, egg chair or a stack of chairs — then match the detail where the guide offers a choice, such as a single or double pod, or hanging versus freestanding. Choose the closest shape.

Do I measure with the cushions in place?

Yes. Measure the chair exactly as it will sit when covered, with any seat or back cushions in their normal positions.

Do I measure the pod or the stand?

Measure the pod (the seat itself) as set out below. The cover is made to fit the pod; you do not need to measure the stand or frame.

Can I measure in inches?

Yes. Measure in centimetres, inches, or metres — you choose your preferred unit when you configure the cover. Keep the same unit throughout.

Ready to order?

Configure your own cover and get an instant quote on our Custom Egg Chair Cover product page.

Downloads

Download the PDF measuring guide
Download the JPG measuring guide

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us