How do I measure for a Custom Chaise Lounger Cover (No Arms)?

This guide explains how to measure your outdoor chaise lounger with no arms for a custom-fitted Kuvr® Chaise Lounger Cover, including each required measurement, where to take it, and how to record it accurately. There are 5 measurements to take, labelled A to E.

Backrest: Measure with the backrest in the position you want covered, up or down. The cover is made for that position.

Kuvr measuring guide diagram for a outdoor chaise lounger with no arms cover, showing measurement points A to E

Important

Provide exact measurements with no extra allowance added. Kuvr® adds a standard tolerance of +25 mm (1 in) to the width and depth for a comfortable fit; no allowance is added to the height. You can measure in centimetres, inches, or metres — you choose your preferred unit when you configure the cover.

Please include photos

Photos of your outdoor chaise lounger with no arms, taken from a few angles alongside your measurements, help us understand the exact shape and get your cover right from the outset. Including a tape measure in shot for scale is ideal.

The measurements

A — Total width

The overall width of the lounger at its widest.

B — Total depth

The overall length of the lounger from the front foot to the rearmost point, measured along the ground.

C — Total height

The vertical height from the floor to the top of the raised backrest.

D — Height to bed

The vertical height from the floor to the top of the bed (the main lying surface).

E — Length from headrest to rear

The horizontal length from the headrest back to the rear of the lounger.

Frequently asked questions

Which lounger guide should I use?

Pick the guide that matches your lounger — whether it has arms or no arms, is a single or double, is wheeled, or is a sofa-bed style. Choose the closest shape.

Should I measure the backrest flat or raised?

If the backrest adjusts, lay it flat and measure the lounger in that position — that is how it will usually be covered. If the backrest is fixed upright, measure it as it sits.

Do I measure with the cushions in place?

Yes. Measure the lounger exactly as it will sit when covered, with any cushions in their normal position.

Can I measure in inches?

Yes. Measure in centimetres, inches, or metres — you choose your preferred unit when you configure the cover. Keep the same unit throughout.

Ready to order?

Configure your own cover and get an instant quote on our Custom Chaise Lounger Cover product page.

Downloads

Download the PDF measuring guide
Download the JPG measuring guide

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us