How do I measure for a Custom Outdoor Stool Cover (Round)?

This guide explains how to measure your round outdoor stool for a custom-fitted Kuvr® Outdoor Chair Cover, including each required measurement, where to take it, and how to record it accurately. There are 3 measurements to take, labelled A to C.

The measurements

A — Total width (diameter) at base

The width (diameter) across the base of the stool, measured between the outer feet.

B — Total height

The vertical height from the floor to the top of the seat.

C — Total width (diameter) at seat

The width (diameter) across the top of the round seat.

Frequently asked questions

Which outdoor chair guide should I use?

Pick the guide that matches your chair — bar chair, office chair, recliner, rocking chair, sofa chair, stool, egg chair or a stack of chairs — then match the detail where the guide offers a choice, such as with arms or armless. Choose the closest shape.

Do I measure with the cushions in place?

Yes. Measure the chair exactly as it will sit when covered, with any seat or back cushions in their normal positions.

I have a set of matching chairs — do I measure each one?

If the chairs are identical, one set of measurements covers them all — just measure one. If they differ, measure each chair separately.

Can I measure in inches?

Yes. Measure in centimetres, inches, or metres — you choose your preferred unit when you configure the cover. Keep the same unit throughout.

Downloads

Download the PDF measuring guide
Download the JPG measuring guide