How do I measure for a Custom Outdoor Chair Stack Cover (Armless)?
This guide explains how to measure your stack of armless outdoor chairs for a custom-fitted Kuvr® Outdoor Chair Cover, including each required measurement, where to take it, and how to record it accurately. There are 8 measurements to take, labelled A to H.
Important
Provide exact measurements with no extra allowance added. Kuvr® adds a standard tolerance of +25 mm (1 in) to the width and depth for a comfortable fit; no allowance is added to the height. You can measure in centimetres, inches, or metres — you choose your preferred unit when you configure the cover.
Please include photos
Photos of your stack of armless outdoor chairs, taken from a few angles alongside your measurements, help us understand the exact shape and get your cover right from the outset. Including a tape measure in shot for scale is ideal.
The measurements
A — Total width
The overall width of the stack at its widest, measured straight across.
B — Total depth
The overall front-to-back depth of the stack at its deepest.
C — Total height
The vertical height from the floor to the top of the stack.
D — Width at feet
The width across the base of the stack, measured between the outer feet.
E — Depth from front of seat to backrest
The horizontal depth from the front edge of the seat to the backrest.
F — Depth from backrest to rear
The horizontal depth from the backrest to the rearmost point of the stack.
G — Height at rear to top of first backrest
The vertical height at the rear, from the floor to the top of the first (lowest) backrest in the stack.
H — Height at front to top of top seat
The vertical height at the front, from the floor to the top of the uppermost seat in the stack.
Frequently asked questions
Which outdoor chair guide should I use?
Pick the guide that matches your chair — bar chair, office chair, recliner, rocking chair, sofa chair, stool, egg chair or a stack of chairs — then match the detail where the guide offers a choice, such as with arms or armless. Choose the closest shape.
Do I measure with the cushions in place?
Yes. Measure the chair exactly as it will sit when covered, with any seat or back cushions in their normal positions.
I have a set of matching chairs — do I measure each one?
If the chairs are identical, one set of measurements covers them all — just measure one. If they differ, measure each chair separately.
Can I measure in inches?
Yes. Measure in centimetres, inches, or metres — you choose your preferred unit when you configure the cover. Keep the same unit throughout.
Ready to order?
Configure your own cover and get an instant quote on our Custom Outdoor Chair Cover product page.
Downloads
Download the PDF measuring guide
Download the JPG measuring guide