How do I measure for a Custom Outdoor Bar Chair Cover (Armless)?

This guide explains how to measure your outdoor bar chair for a custom-fitted Kuvr® Outdoor Chair Cover, including each required measurement, where to take it, and how to record it accurately. There are 4 measurements to take, labelled A to D.

The measurements

A — Total width

The overall width of the chair at its widest point, measured straight across.

B — Total depth

The overall front-to-back depth of the chair at its deepest point.

C — Total height

The vertical height from the floor to the very top of the chair back.

D — Height to top of seat

The vertical height from the floor to the top of the seat.

Frequently asked questions

Which outdoor chair guide should I use?

Pick the guide that matches your chair — bar chair, office chair, recliner, rocking chair, sofa chair, stool, egg chair or a stack of chairs — then match the detail where the guide offers a choice, such as with arms or armless. Choose the closest shape.

Do I measure with the cushions in place?

Yes. Measure the chair exactly as it will sit when covered, with any seat or back cushions in their normal positions.

I have a set of matching chairs — do I measure each one?

If the chairs are identical, one set of measurements covers them all — just measure one. If they differ, measure each chair separately.

Can I measure in inches?

Yes. Measure in centimetres, inches, or metres — you choose your preferred unit when you configure the cover. Keep the same unit throughout.

Downloads

Download the PDF measuring guide
Download the JPG measuring guide