How do I measure for a Custom Oval Table Cover?

This guide explains how to measure your oval table for a custom-fitted Kuvr® Outdoor Table Cover, including each required measurement, where to take it, and how to record it accurately. There are 5 measurements to take, labelled A to E.

The measurements

A — Total width

The full width of the oval tabletop along its longest axis, from one outer edge to the other, including any overhang.

B — Total depth

The width across the narrower axis of the oval, at its widest point.

C — Total height

The vertical height from the floor to the top of the table surface.

D — Measurement around curve

The distance measured around one curved end of the oval, following the curve.

E — Length between curves

The length of the straight section of the tabletop between the two curved ends.

Frequently asked questions

Do I include the tabletop overhang?

Yes. Measure to the outer edge of the tabletop — including any overhang or glass insert that projects beyond the frame or legs — so the cover clears the widest point.

Should I use a table guide or a set guide?

Use a set guide if you want the table and its chairs covered together; use a table-only guide if you just want the tabletop covered. Pick the shape that matches your table.

My furniture isn't quite the shape shown — what should I do?

Measure to the closest points shown and send a couple of photos alongside your figures; we’ll confirm the exact fit from those.

Can I measure in inches?

Yes. Measure in centimetres, inches, or metres — you choose your preferred unit when you configure the cover. Keep the same unit throughout.

Downloads

Download the PDF measuring guide
Download the JPG measuring guide